Nov 072014
 

As you know by now, the three of us decided on a Red Riding Hood theme for our costumes this year. Looking at the pics, you can probably tell what my least favorite part of my outfit was: that damned belt.

The Belt and Armbands

It all started with a pattern. Specifically, Butterick B5371. Oh, the image promised good things:

Specifically, the belt on the top left and the bracers on the bottom left. A simple little waist-cincher and matching armguards. What could possibly go wrong?

Everything.

Everything could go wrong.

That belt has the minimum amount of sewing possible. You’re meant to cut out the lining and outer fabric and fuse them with fusable webbing rather than stitch the edges. I can sew a straight line with a machine, but leaving the edges raw meant every wobble of my scissors showed. Plus, the fabric I picked didn’t like heat, so it was awful trying to get the webbing to stay.



You see the problem. :/

I picked a white lining, which I discovered was a mistake: the straps need lining to give them enough heft to close anything, but the lining totally shows, because unlike every other strap anywhere ever, instead of stitching the lining to the fabric right-sides together and inverting, you just fuse and pray.

The pictures you see above? Those are finished, according to the pattern. 100% complete. Yay belt. I couldn’t leave it like that. I did what I could, trimming the edges in ribbon and clipping some of the straps, but it still doesn’t look great.

Of course, that leads to the next problem: in a belt that wide, there is no tapering whatsoever. With my corset on, I have a pretty severe hourglass sillhouette. It just gapes badly.

Oh, and what’s with the straps being like 6 inches longer than the belt?! Blech. I had loose bits flopping about all day when I went to work.

Capes and Vests

The two capes, on the other hand, were MUCH nicer patterns from Fleece Fun. Funnily enough, the Woodsman is wearing their Red Riding Hood pattern, with a hook instead of ribbon; I wanted a floor-length cape, so I went for their Fast Hooded Cape.

These are the best cape patterns I’ve ever seen, and I keep coming back to them again and again. They’re free, they’re simple, and including printing and taping, you can knock out a cape in an afternoon. You do have to be a little careful when taping; you’ll need to trim the margins, though I like to only trim one side so I can overlap the other margin underneath the trimmed one when taping two pieces together. Otherwise, all is great.

The vest was McCalls 2447; I had Chaos help me with the math to upsize the pattern to fit him, making this now the vest that fits him the best. We meant to put buttonholes and shiny buttons on it, but the buttonholer is apparently made of witchcraft and dark sorcery, so we have to wait until the right moon phase to make the darn thing work 🙂

Axes

DSCN0929

Kae did this all on his own while I was at work 😀 He went and got some sticks, spray-painting them gold, which instantly made me think of The Honest Woodsman, definite A+ from me. He then used styrofoam blocks to make the axe-heads. That’s when he ran into a little trouble: he had some trouble finding the remains of our scattered paint collection. He decided to use Rub n’ Buff on the heads, but it took him some time to find our black spray paint to go underneath. That turned out to be a blessing in disguise, because he mentioned this to Chaos, who reminded him that spray paint melts styrofoam. Instead, he grabbed duct tape to make a solid surface and then painted over it with the Rub n’ Buff. Works for me!

Makeup

Chaos doesn’t like things touching his eyes, so he’s never worn stage makeup before. We were going to go for a minimal look, but after browsing minimalistic makeup tutorials with a Wolf theme, he declared that they all looked stupid. I convinced him to try the full-face getup, and it paid off 🙂

We used the following makeups:

  • Ben Nye cl-26 grey
  • Ben Nye cl-25 steel grey
  • Ben Nye cl-29 black
  • Wet n’ Wild a042 pagan angel lipstick
  • Wet n’ Wild 392a tunnel vision eye-shadow palette

I took a photo of his face without glasses and ran it through GIMP filters to make a basic outline of his face, which we planned out the look on. We were trying to emulate the look of a wolf’s fur pattern, which more or less worked; I’m definitely not a makeup expert, but it looked pretty good. Later we mused that furry ears or a tail would have completed the look.

And there you have it!

Liked it? Take a second to support yamikuronue on Patreon!

 Leave a Reply

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

(required)

(required)